- Operation -
35
4.2 Receiving
calls
When an incoming call arrives, the ringing tone sounds on the handset.
The symbol will flash in the display. Press the call button
on the
handset and the connection will be made. The call will be automatically
taken as soon as you lift the handset from the base station To end the call,
replace the handset in the base station or press the call button
on the
handset.
4.3 Making
calls
1. Enter the required telephone number with a maximum of 20 digits
using the number pad. The numbers pressed are shown in the
display. If more than 14 digits are pressed, the indicator on the
left-hand edge of the display will appear and the last 14 digits will be
shown.
2. Press the call button
and the required connection will be made.
The call duration in minutes and seconds is shown in the display during
a call. Ten seconds after dialling, the display will switch from showing
the number dialled to showing the duration of the call. The call duration
will still be retained in the display for a few seconds after the call has
been ended.
3. To end the call, press the call button
or replace the handset on
the base station.
Note:
If you have entered a number incorrectly, you can delete the
number by repeatedly pressing the
button. The number is completely
deleted by pressing the
button for a long time.
You can also get a dialling tone by first pressing the call button
. On
entering the digits of your required phone number, your telephone will dial
the number directly. With this method of making a call, it is not possible to
correct individual digits in the number in the manner described above.
