P. 9
- AUDIOLAB Live AN Split
English version
5. INSTALLATION & CONNECTION
Mains Connection
This is a dual voltage unit. Please ensure that the
Live AN Split is set to the correct supply voltage
before plugging the power cord into the wall
outlet, use the same fuse as marked on the fuse
holder t the AC power connection socket.
Do not insert power cord into the unit until volt
-
age has been correctly set. Do not plug the power
cord into AC power cord into AC power until volt
-
age has been correctly set.
The mains connections of the Live AN Split is
made by using the enclosed mains cord and a
standard IEC receptable. It meets all of the inter
-
national safety certification requirements.
Audio Connection
The Live AN Split presents with balanced XLR
connectors and 1/4" TRS phone jack, it can be
inter faced by several ways to support a variety
of applications without any signal loss.
a. Wiring Configuration
Eiher the 1/4" TRS
(Tip-Ring-Sleeve) phone jack or the XLR servo
connector can be wired in balanced and un
-
balanced modes, which will be determined
by the actual application status. Please wire
your systems as the following examples:
•
For 1/4" Phone jack
•
For XLR connector
TS Type Unbalanced
TRS Type Balanced
TRS Type Unbalanced
XLR Type Unbalanced
XLR Type Balanced
