AudioControl MP-200, Руководство пользователя

Страница: 5 / 14

A Tour of the MP-200
Front Panel View
94DB SPL REFERENCE LED
Indicates when the acoustic SPL level at
the CM-10 mic is 94 dB. Useful for
calibrating analyzer systems.
LOW BATTERY LED
Indicates when it is time to put a
new battery into the MP-200.
LINE LEVEL INPUT GAIN
Adjusts the gain of the line level
input signal to channel two.
POWER SWITCH AND
MIC GAIN CONTROL
Controls the main power of the
MP-200 and selects the gain of
both microphone inputs.
PINK NOISE OUTPUT LEVEL
Adjusts the output signal level of the
pink noise generator.
CHANNEL TWO INPUT SWITCH
Selects which input is sent to the
channel 2 outputs.
POWER LED
A little reminder to help keep
people from putting the MP-200
back into their toolbox with the
power on.
Rear Panel View
MIC INPUTS
Microphone level female XLR
inputs for the CM-10
measurement microphone.
LINE INPUTS
Summed mono, line level RCA
input jacks for an external
reference signal to channel two.
LINE
OUTPUTS
Line level RCA
output jacks.
STEREO OUTPUT
Stereo 1/8" minijack
output to feed standard
computer sound card
line inputs.
UNBALANCED PINK NOISE OUTPUT
Variable level ¼" phone jack output of
the digital pink noise generator. The pink
noise circuitry is only active when a plug
is inserted into this jack.
EXTERNAL DC
POWER INPUT
For operation from
an external
9 vdc power source
Introduction