AudioControl maestro m9, Руководство по пользовательскому опыту

Страница: 26 / 48

®
26
n
avIgatIng tHe
S
etup
m
enuS
MAESTRO M9
General Setup
These menu screens display general information and system controls. (In-
formation Only)
Source Input: Displays the currently active audio source input.
Incoming Format: Displays format of digital audio stream if present,
Incoming Sample Rate: Displays incoming sample rate of digital audio
stream, if present.
Incoming Bitrate: Displays bit rate of digital audio stream, if present.
Dialnorm: When a Dolby Digital audio stream is connected to this input
this is the Dialogue Normalization setting requested.
Video Input: The audio and video inputs on the Maestro M9 generally
follow the source selected. This setting allows you to temporarily override
and change the video settings so you can utilize a different video source.
Setting resets itself when source is change.
Incoming Resolution: Displays the incoming video resolution.
Audio Compression: Compressing the dynamic bandwidth of the audio
can be a good thing, especially for those late night action-movie festivals.
Compression increases the volume of quiet sections and reduces the vol-
ume of the louder sounds. These 3 options for this setting only apply to
some Dolby Digital or DTS soundtracks. As part of the general set up,
this setting applies to all inputs with digital audio streams that support this
function and is recalled each time the unit is powered up.
Off: Audio compression is not applied (default)
Medium: For loud segments of the audio stream, compression is applied
Medium: to reduce the level. Dolby True HD content will be com-
Mediu pressed automatically
High: Maximum compression is applied with this setting. The differences
High: between quiet passages and loud portions of the audio track are
High: minimized
Balance: Adjusts the left/right balance of the front outputs.
Dolby Center Spread
These setting apply to Dolby Surround mode decoding of two-channel
sources.The “spread” determines how strongly the Dolby Surround decoder
creates the center channel image. Normally this signal is fed only to the
center channel speaker output, but if there is no center speaker, a phan-
tom center channel is created using the front left and right channels. The
adjustment varies the spread of the center image.
Digital Output Frequency - Sets the sampling frequency of the audio
Analogue-to-Digital converter.