manualshive.com logo in svg

AudioControl DQDX, Руководство пользователя

Поделиться
Скачать
AudioControl DQDX Скачать руководство пользователя страница 24

-----------------------------------------------

24

 ----------------------------------------------

Level Matching

If you have ever listened to a friend’s “killer” car audio system and 

heard lots of hiss, clicks or pops, then you have experienced an improp-

erly level-matched system. When a performance Autosound system is 

properly level matched, you should get the maximum output from your 

source unit and amplifiers without any clipping or annoying hiss. The 

following steps will help guide you through the process!

1.

  Set your source unit’s fader and balance controls to their center 

position and your amplifier(s) gain control to a minimum (usually 

counter clockwise).

2.

  Disconnect the output RCA connections between your DQDX and 

your amplifier(s)… otherwise get some earplugs.

3.

  Start playing some relatively dynamic music and set the volume 

on your source unit to about ¾ max volume. You should not hear 

anything at this point. If you are hearing music, go back to step 

#2… If you are hearing voices, please go see a doctor!

4.

  Starting with the DQDX input level controls, adjust the control 

knob clockwise until the Input Maximized LED just begins to 

flicker. Do not continue to turn past this point.

5.

  Now adjust the output level control until the output maximized 

LED starts to flicker.

6.

  Decrease the volume control on your source unit and turn off 

the power to the system. Now re-connect the RCAs between the 

DQDX and your amplifier(s).

7.

  At this point you can adjust your amplifier gain control according 

to the specifications of your amplifier manufacturer. 

Содержание DQDX

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды