AudioControl DQDX страница 5 Скачать руководство пользователя

Страница: 5 / 32

----------------------------------------------- 5 -----------------------------------------------

Quick Installation Information

If you are a seasoned audio enthusiast and are chomping at the bit

to begin your experience with the DQDX, we offer some Quick Install

Guidelines below to help maximize your experience. Please also refer

to the system diagram examples on page 14, 15, and 16.

Physically mount the DQDX in a location that keeps it away from

beverage spills, food crumbs, and curious fingers. You will want

to select a location that allows you access to the top panel con-

trols.

The DQDX needs to be installed in the signal path between

your source unit (or as some may call it, “Your Radio”) and an

after-market amplifier(s)..

Note:

If your source unit has front, rear, and subwoofer RCA Line

Level outputs, connect them to the corresponding inputs on your

DQDX. If your source unit has only front and rear inputs fear not!

Just connect these to the front and rear inputs on the DQDX and

switch the “Sub to Front” jumper to the ON position. There is a

more detailed description of the jumpers located under the cov-

er in the section titled “Under The Cover”. Changing this jumper

to ON will route the low pass signal (as defined by your crossover

selection) to the Sub outputs of the DQDX.

Use RCA connecting cables to connect the RCA outputs of the

DQDX to your after market amplifier(s). If this is not obvious to

you, quickly pack up your DQDX and run to your nearest autho-

rized AudioControl dealer to have them perform the installation.

You will thank us later.

C12 volt power, ground and turn-on wires as needed.

Don’t forget the fuse!

Содержание DQDX

































Результаты поиска

Содержание DQDX

Отзывы:

Похожие инструкции для DQDX

Бренды по названию

Популярные бренды

AudioControl DQDX, Руководство пользователя

Результаты поиска

Содержание DQDX

Отзывы:

Похожие инструкции для DQDX

Бренды по названию

Популярные бренды