AudioControl Concert AVR-4, Руководство по функционалу пользователя, Страница: 22 / 72

Phone 425-775-8461 • www.audiocontrol.com
®
22
DOLBY VOLUME - Selects whether Dolby is engaged for
this input with the options being “Off”, “Cinema” or “Music”
and the default being “Off”. Dolby Volume corrects for vol-
ume inconsistencies and improves audio frequency response at lower levels.
This feature is not available when using the Multi-channel audio or “Direct”
modes.
For more information go to www.dolby.com/consumer/technology/dolby-
volume-works.html
DOLBY LEVELLER - The setting options are “0” (minimum)
and “10” (maximum) with the default being “9”. This Dolby
Volume feature allows matching of quiet and loud sources of
source unit inputs irregardless of recording levels of content being played by
a particular source unit.
DV CALIB OFFSET - Dolby Volume provides a Calibration Offset param-
eter that compensates for speaker efficiencies and listening positions. If you
set the Speaker Levels on the Concert AVR-4 properly using an SPL meter
(like the AudioControl SA-3052) then you can leave this setting at 0.
SURROUND Ex - When playing Dolby Digital EX encoded material, the
Concert AVR-4 gives you the option of selecting the Surround settings,
provided you have Surround Back loudspeakers connected. Setting options
are “Auto DD EX”, “Auto PLIIx” and “Manual”.
Auto DD Ex - The Concert AVR-4 will automatically switch to Dol-
by Digital EX mode when a Dolby Digital EX bit stream is detected.
Auto PLIIx Movie - The Concert AVR-4 will automatically switch
to Pro Logic lIix Movie mode decoding when a Dolby Digital EX bit
stream.
Manual - If a Dolby Digital Ex bit stream is detected, the Concert
AVR-4 will treat it as a normal Dolby Digital signal. The EX or
Pro Logic lIix decode modes may be implemented by pressing the
“MODE” button.
STEREO MODE - If you are using an external subwoofer, and are listen-
ing to stereo (two channel) sources, either digital or analog system, you can
select to configure how the subwoofer receives it’s bass information. The
“Stereo Mode” functions are bypassed when using an analog source and you
have selected the “Stereo Direct” mode.
As Speaker Types -
Your normal speaker configuration (as selected in
the “Spkr Types” menu) determines your subwoofer output.
Left/Right - Full frequency audio will be sent to your front left and
right speakers with no information going to the subwoofer.
n
avIgatIng tHe
s
et
-u
p
M
enus