AudioControl Concert AVR-4, Руководство по функционалу пользователя, Страница: 20 / 72

Phone 425-775-8461 • www.audiocontrol.com
®
20
Initial Display Configurations
Your Concert AVR-4 has a default digital video output resolution of 720/60
and 525-line 60Hz NTSC for analogue video as these are the most com-
mon display resolutions. Needless to say you can change these in the set-
up menus if necessary. If your display device uses a different resolution, it
should synchronize automatically. However should you encounter an un-
stable OSD (on screen display) you may need to make a resolution change.
Configurations For 1080p/24 Applications
The Concert AVR-4 supports both 1080p/24 fps (frames per second) and
the more commonly used 1080p/60 fps video formats. To properly utilize
the 1080p/24 format you will want to make sure that the source device (i.e.
Blu-ray player) and the display device (i.e. projector or TV) are both capable
of supporting this format. In the Video Output section of the Setup menus,
set the Output Resolution of your Concert AVR-4 to 1080p (not Preferred)
and make sure that the Frame Rate is set to follow input. Failure to do any
of the above could result in no image.
Navigating
Navigating the Set-Up Menus is a very simple process that can be done us-
ing the appropriate front panel controls on your Concert AVR-4 or by using
an IR remote control (sold separately) that incorporates the appropriate IR
codes.
1. Press the Menu button once to enter the Setup Menus. The word
“Menu” will appear on the display of your Concert AVR-4 and the actual
menu will appear on your display device.
2. Use the Input selection button “Input
∧
” and “Input
∨
” to navigate among
the menu’s and use the “ < Info” and “Mode > ” buttons to select appropriate
menu screen.
3. Press the “SELECT” button to select the menu options.
4. Press the Menu button anytime to exit the Menu screens and any setting
changes will be saved automatically.
n
avIgatIng tHe
s
et
-u
p
M
enus
If at any point you need
to reset the video output
resolution and frame rate to
the default setting, push and
hold the “Select” button for 3
seconds.