AudioControl Architect 500, Руководство по установке

Страница: 24 / 30

®
20
Appendix A
Appendix A - Bridging The Architect
Caution - When bridging a zone, the minimum
speaker load impedance on that bridged output is
4 ohms. In a bridged system, each channel of the
bridged pair “sees” one half of the speaker load.
This means that a bridged amp driving a 4 ohm
speaker is operating into a 2 ohm load.
To increase the output power of The Architect, you can join
(bridge) the two channels of one zone into a single channel of 100
watts. Accomplishing this is a simple matter. Just connect the
audio input to both channels of that zone using a ‘Y’ cord adapter
and then connect the speaker terminals as shown in the diagram
below.
Bridge connection showing ‘Y’ cord
and Speaker Hookup