Architect
Model 110-Model 210-Model 210ES
Installer’s Guide
™
5
A Guided Tour Of
Architect Model 210ES, Model 210 and Model 110
Front Panel
Power LED -
Nothing too tricky here...when
you have the Master Power switch on the
back panel turned on, this LED will initially
turn Red and then Blue, indicating that all
systems are go. If the light stays Red, the
Architect is in a sleep mode
Protection LED -
This LED has three faces.
In normal operation it glows Blue when mu-
sic is playing. If the Protection LED turns
Red, then one of the internal protection
circuits have come into use. No LED means
the unit is off or in a sleep mode.
Channel Status LED -
This dual-color LED
serves two purposes. It illuminates Blue
when the corresponding channel is active
and everything is operating correctly. The
second function of the status LED is to turn
Red if something has caused the amplifier to
go into protection or it is operting at a very
high temperature.
Speaker Equalization controls
Model 210 and Model 210ES -
This array
of knobs provide up to 12dB cut or boost at
45Hz, 150Hz, 300Hz, 700Hz, 2500Hz and
12KHz. After initial adjustment the only
time you would change the control settings
are 1) if you connect different speakers into
the system, 2) if you physically move them
significantly, or if 3) your room acoustics
change through addition or rearrangement
of furniture, wall or floor coverings, large
hairy dogs, etc.
Guided Tour
For more information on the LED
functions, see Appendix B on page 19.
