AudioCodes MediaPack MP-201B, Руководство пользователя, Страница: 56 / 270

MP-20x Telephone Adapter 56 Document #: LTRT-50609
User's Manual
Parameter Description
3 Way Conference
Notes for MP-202C when three-way conferencing is enabled and two lines are enabled:
•
When both phone lines are active (off hook or ringing), a user can’t place a call on hold. If a call is
placed on hold, a busy tone is played.
•
When there are two active calls on one line(*), the other line is unavailable (i.e., a busy tone is
played on the other phone). Any incoming call to the second line is rejected.
•
When both lines are in a call, a call waiting for either line is rejected.
•
No confirmation tone is played after a successful call transfer in “flash + digits” mode.
* A two active call scenario starts when a user places a call on hold and hears the dial tone.
3 Way Conference
Mode Selects how 3-way conference calls are handled:
ƒ
Local: locally by the device
ƒ
Remote: by a remote media server (RFC 4240)
Media Server Address The address of the remote media server that handles conference calls.
Note: This parameter is available only when "Remote" is selected for the
parameter '3 Way Conference Mode'.
Message Waiting Indication
Enabled If a user has an unheard voice mail message, a stutter dial tone is heard
when the user picks up the phone. In addition, MP-20x generates an FSK
signal to the phone to indicate that a message is waiting. If the telephone
connected to MP-20x supports this feature, an MWI ‘envelope icon’ is
displayed.
Subscribe to MWI Select this check box if you must register with a MWI subscriber server. If
so, configure the three parameters below.
MWI Server IP Address
or Host Name The IP address or host name of the MWI server.
Note: This parameter is available only when the check box 'Subscribe to
MWI' is selected.
MWI Server Port The port number of the MWI server.
Note: This parameter is available only when the check box 'Subscribe to
MWI' is selected.
MWI Subscribe
Expiration TIme The interval between registrations.
Note: This parameter is available only when the check box 'Subscribe to
MWI' is selected.
General Parameters
Stutter Tone Duration
When you enable message waiting and an unheard message exists, you'll
hear a stutter tone for the duration configured in this parameter and/or when
you activate the call forwarding feature (refer to 'Forwarding Calls to
Another Phone' on page
69 )
Out of Service Behavior Defines the tone which is played instead of a dial tone if the user configured
a registrar IP and the registration failed. When the Reorder tone is selected,
a Reorder tone is played instead of a dial tone. If “No Tone” is selected,
then no tone is played.