AudioCodes MediaPack MP-201B Скачать руководство пользователя страница 201

Страница: 201 / 270

Version 3.0.1

201

July 2010

MP-20x Telephone Adapter

13. Security

The log table displays the following:

•

Time:

to determine the time the event occurred.

•

Event:

type of event. There are five types of events:

♦

Inbound Traffic:

The event is a result of an incoming packet.

♦

Outbound Traffic:

The event is a result of outgoing packet.

♦

Firewall Setup:

Configuration message.

♦

WBM Login:

Indicates that a user has logged in to WBM.

♦

CLI Login:

Indicates that a user has logged in to CLI (via Telnet).

•

Event-Type:

textual description of the event:

♦

Blocked:

The packet was blocked. The message is color-coded red.

♦

Accepted:

The packet was accepted. The message is color-coded green.

•

Details:

details of the packet or the event, such as protocol, IP addresses, ports,

etc.

To change the security log settings:

In the 'Log' screen, click

Settings

; the screen 'Log Settings' opens.

Figure

13-31: Security Log Settings

Содержание MediaPack MP-201B















































































































































































































































































Результаты поиска

Содержание MediaPack MP-201B

Отзывы:

AudioCodes MediaPack MP-201B, Руководство пользователя, Страница: 201 / 270

Результаты поиска

Содержание MediaPack MP-201B

Отзывы: