CHAPTER 1 Introduction
Mediant 500 Gateway & E-SBC | Hardware Installation Manual
1
Introduction
This document provides a hardware description of the Mediant 500 E-SBC (hereafter referred to as
device
) and step-by-step procedures for mounting and cabling the device.
The device supports the following interfaces:
■
Four Gigabit Ethernet (10/100/1000Base-T) LAN ports
■
Single E1/T1 port interface over a single copper wire pair (PRI interface is a separate-orderable
item)
■
Two USB ports for optional, USB storage services
■
Serial console port (RJ-45) for device management
●
Serial Hardware configurations may change without notice. Currently available
hardware configurations are listed in AudioCodes Price Book. For further enquiries,
please contact your AudioCodes sales representative.
●
For information on configuring the device, refer to the device's
User’s Manual
.
- 1 -
