AudioCodes Mediant 3000, Руководство пользователя

Страница: 682 / 872

User's Manual 682 Document #: LTRT-89729
Mediant 3000
Parameter Description
[BehaviorUponRadiusTi
meout]

[0] Deny Access = Denies access.

[1] Verify Access Locally = (Default) Checks password locally.
Web: Local RADIUS
Password Cache Mode
[RadiusLocalCacheMod
e]
Determines the device's mode of operation regarding the timer
(configured by the parameter RadiusLocalCacheTimeout) that
determines the validity of the user name and password (verified by the
RADIUS server).

[0] Absolute Expiry Timer = When you access a Web page, the
timeout doesn't reset, instead it continues decreasing.

[1] Reset Timer Upon Access = (Default) Upon each access to a
Web page, the timeout always resets (reverts to the initial value
configured by RadiusLocalCacheTimeout).
Web: Local RADIUS
Password Cache Timeout
[RadiusLocalCacheTime
out]
Defines the time (in seconds) the locally stored user name and
password (verified by the RADIUS server) are valid. When this time
expires, the user name and password become invalid and a must be re-
verified with the RADIUS server.
The valid range is 1 to 0xFFFFFF. The default is 300 (5 minutes).

[-1] = Never expires.

[0] = Each request requires RADIUS authentication.
Web: RADIUS VSA
Vendor ID
[RadiusVSAVendorID]
Defines the vendor ID that the device accepts when parsing a RADIUS
response packet.
The valid range is 0 to 0xFFFFFFFF. The default is 5003.
Web: RADIUS VSA
Access Level Attribute
[RadiusVSAAccessAttri
bute]
Defines the code that indicates the access level attribute in the Vendor
Specific Attributes (VSA) section of the received RADIUS packet.
The valid range is 0 to 255. The default is 35.
[MaxRADIUSSessions] Defines the number of concurrent calls that can communicate with the
RADIUS server (optional).
The valid range is 0 to 240. The default is 240.
EMS: RADIUS Auth
Number of Retries
[RADIUSRetransmission
]
Defines the number of retransmission retries.
The valid range is 1 to 10. The default is 3.
[RadiusTO] Defines the time interval (measured in seconds) that the device waits
for a response before a RADIUS retransmission is issued.
The valid range is 1 to 30. The default is 10.
53.6 SIP Media Realm Parameters
The Media Realm parameters are described in the table below.
Media Realm Parameters
Parameter Description
Media Realm Table
Web: Media Realm Table
EMS: VoIP > Media >
Media Realm This table parameter defines the Media Realm table. The Media Realm
table allows you to divide a Media-type interface (defined in the Multiple
Interface table) into several realms, where each realm is specified by a