Audio A10-TX, Руководство пользователя

Страница: 8 / 20

- 8 -
A10-TX User Guide
Audio Setup Menu
Selections Icon Description Options
Exit Returns to the main menu.
Low Cut
Activates a low frequency cut filter to the audio
input. 18 dB/octave
• Off
• 40 Hz
• 60 Hz
• 80 Hz
• 100 Hz
• 200 Hz
Limiter The limiter reduces peak levels of the analogue
audio input before digital conversion to prevent
audio overload. The recommended setting is On.
• On
• Off
Lav / Mic / Line
Selects the input type at the LEMO-3 connection.
ª
For Mic/Line, the AC-BAL-XLR accessory is
required.
• Lav
• Mic
• Line
• P48 - mic level with 48 V phantom
• P12 - mic level with 12 V phantom
Record / TC Menu
Selections Icon Description Options
Exit
Returns to the main menu.
Record
Select Record to enter Record mode (This begins
recording). The Record status is remembered
across sleep and power cycles.
File Info
Shows important information about the file being
recorded.
• Time Elapsed
• Time Remaining
• Timecode
• File Name
TX / Record Mode
Select the operational mode of the A10-TX. • TX/Rec - simultaneous wireless
transmission and recording
• RecOnly - recording function only
Timecode Enter Timecode menu.
Timecode values from either the attached external
timecode generator or the internal generator are
shown.
ª
Whilst in this menu, wireless transmission is
suspended, and timecode may be sent via AC-
TCBNC-OUT or AC-TCLEMO accessories.
• Time of Day
• External
• Jam - applies external timecode to the
internal generator.
ª
Jamming to an external timecode
source requires the AC-TCBNC-IN
or AC-TCLEMO accessories.
Frame Rate
Sets the frame rate of the timecode clock. Select a
rate that matches the incoming timecode rate.
ª
Rejam is required after setting frame rate.
• 23.98
• 24
• 25
• 29.97
• 29.97 DF
• 30
• 30 DF