Page of
4
32
Assembling the stands
The stands require assembly. Unpack all parts. There
should be 2 larger bottom plates, 2 smaller top
plates, 2 bigger vertical poles and 2 smaller vertical
poles. Next there are a number of plastic bags
containing screws and assorted items.
Locate the 8 flat top screws and use them to
assemble the top and bottom plates to the poles.
This will be easiest to do with the poles in a horizontal
position. Watch out to use the correct side of the
plates, there should be a provision for the screw to
sink a bit inside the plate. You might need to help
align all elements properly.
The spikes are optional. They help to isolate the
speakers from the floor and stand itself. We
recommend using both the bigger bottom spikes
and smaller top spikes. There are also little circular
pieces to help prevent the spikes from damaging
your floor. The spikes also make it easy to fix any
wobbling due to an uneven floor.
Sit down & listen
Содержание 359
Страница 1: ...Getting Started Guide Sit down listen ...
Страница 35: ... This page has intentionally been left bank ...
Страница 36: ...Sit down listen ...
