Troubleshooting
No sound
−
Ensure the AC adapter is securely plugged into the wall outlet and the transmitter DC IN jack.
−
If using batteries to power the transmitter a blinking BLUE light on transmitter indicates drained
batteries. Replace with 4 fresh AA batteries
−
Press the “PAIR” button on the transmitter and the ‘Light/Pair’ button on one of the speakers for
5 seconds. There will be an audio test tone when the pairing process is finished. Repeat the
procedure on each additional speaker.
−
Ensure the speaker POWER button is in the ON position.
−
Speaker batteries may be too weak. Replace with new batteries or connect with the included
AC adapter.
−
Ensure the connected audio device is switched on and is producing a signal.
−
Ensure that the audio device volume level is set 75% of maximum.
−
Redo the pairing process by pressing the “Pair” button on the speakers and transmitter
simultaneously.
Distortion
−
Speaker batteries may be too weak. Replace with new batteries or connect with the included AC
adapter. Blinking BLUE light on transmitter indicates drained batteries.
−
Ensure that the audio device volume level is set 75% of maximum.
−
The speakers are too far from the transmitter. Move closer to the transmitter base.
−
The audio input signal may be too low or too high. Set the audio source to 75% of maximum.
−
Ensure both speakers are placed within the effective operational range. If either speaker is out
of range it will cause distortion to both speakers.
