Operation
1.
To turn on the speaker, press and hold the POWER button for 3 seconds. The GREEN
power LED illuminates.
2.
To turn off the speaker, press and hold the POWER button for 3 seconds again.
Remote Control Storage
Power on/off
Mood light / Pair
Volume Up/Down
Front View
Remote Control
1.
The remote control is ready to use with a factory-installed button cell battery. It can be stored in
the recessed area on the front panel.
2.
Press “+” “-” button to get desired volume level.
3.
Press the Light button to turn on/off the Mood light feature.
4.
When the speakers are on, pressing the “Power” button puts them in standby mode. The speaker
BLUE light changes to GREEN.
5.
Pressing the “Power” button while the speakers are in standby mode puts them back to active
mode. The GREEN light changes to BLUE.
NOTE:
The remote control can be used to raise or lower the volume or change the status of the
speakers from active to standby or from standby to active. If the speakers are completely
powered off the remote will not power the system up.
Basic Operation
1. When the transmitter is plugged in or batteries are inserted, turn the on/off switch to ON. The
transmitter's light will be GREEN.
2. To turn on the speaker, press and hold the POWER button on the front panel of the speaker for 3
seconds. The Power buttons light will be GREEN.
3. Turn on the audio source and set the source volume to 75% of maximum. The BLUE light on the
transmitter and speaker illuminate when the audio signal link between the two is made. This will
