6
Installation
Mounting/removing the product
Mounting
• When using an electric screwdriver, make sure to use one with a clutch.
• Set the torque to the minimum setting and tighten the screws carefully to avoid deformation. If you tighten the screws too much, the mounting
bracket may be damaged.
• When using 3.5 mm diameter or #6 screws, use a washer.
1. Use the included wood screws to mount the bracket to the wall.
2. Install the main unit into the bracket.
3. Push the main unit until the mounting bracket removal button on each side clicks.
4. Make sure that the main unit is securely fixed in place.
• The main unit is not fixed firmly if either of the mounting bracket removal buttons is pushed in.
5. After installation is complete, attach the BNC cable to a wireless receiver.
Wall or ceiling
Wall or ceiling
Electrical box, outlet box,
etc.
When using an electrical box to mount the product to the wall
Mounting bracket removal buttons
