background image

2

Notes on use

• Be sure to read the connected device’s user manual before use.
• Turn off the power of the connected device before connecting or disconnecting cables.
• If you use the product near a TV or radio antenna, you may hear unwanted noise in the television or radio. If this occurs, move the product away 

from the device.

Notes on installation

• Install the product where there is a clear line of sight from the 

transmitter. Do not install the product behind interior decoration 
elements. 

• Audio-Technica accepts no responsibility for accidents such as 

falling that come as a result of improper installation.

• Install the product in a place where the antenna will not be 

damaged by moving people or equipment.

• Do not install the product where unwanted noise is received from 

devices such as light dimmers, fluorescent lighting, LED lighting, 
large motors, office automation equipment such as computers, or 
electronic musical instruments.

• Do not install the product close to devices such as wireless LAN 

routers. This may result in unwanted noise.

• For best RF performance of the connected diversity receiver, install 

the antennas at least 1 m (3.3') apart.

 

Maintenance

• If the product becomes dirty or covered with dust, be sure to turn off the connected device before wiping the product off with a dry and soft cloth.
• Do not use benzine, thinner or electrical contact cleaner, etc. They may deform or otherwise damage the product, or cause operational failure.

Install the product where 

there is a clear line of 

sight from the transmitter

Space antennas at least 

1 m (3.3') apart

Keep the product away from 

windows (install the product 

where it does not pick up 

unwanted radio noise) 

Install the product in a place 

where the product is not disturbed 

by people or equipment 

Содержание ATW-A410P













Отзывы: