background image

1

Thank you for purchasing this Audio-Technica product.
Before using the product, please read through the Quick Start Guide and Caution Guide, as well as this user manual 
when necessary, to ensure that you use the product correctly.

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure 
safety, observe all warnings and cautions while using the product.

Introduction

•  Do not use the product near medical equipment. Radio waves 

may affect cardiac pacemakers and medical electronic 
equipment. Do not use the product inside medical facilities.

•  When using the product in aircraft, follow airline instructions.
•  Do not use the product near automatic control devices such as 

automatic doors and fire alarms. Radio waves may affect 
electronic equipment and cause accidents due to malfunction.

•  Do not disassemble, modify or attempt to repair the product to 

avoid electric shock, malfunction or fire.

•  Do not subject the product to strong impact to avoid electric 

shock, malfunction or fire.

•  Do not handle the product with wet hands to avoid electric 

shock or injury.

•  Disconnect the product from a device if the product begins to 

malfunction, producing smoke, odor, heat, unwanted noise or 
showing other signs of damage. In such a case, contact your 
local Audio-Technica dealer.

•  Do not allow the product to get wet to avoid electric shock or 

malfunction.

•  Do not put foreign matter such as combustible materials, 

metal, or liquid in the product.

•  Do not cover the product with a cloth to avoid fire or injury by 

overheating.

•  Follow applicable laws regarding mobile phone and 

headphone use if using headphones while driving.

•  Do not use the product in places where the inability to hear 

ambient sound presents a serious risk (such as at railroad 
crossings, train stations, and construction sites).

•  When charging, make sure to use the included USB charging 

cable.

•  Do not charge with devices that have quick-charge 

functionality (with a voltage of 5 V or more). Doing so may 
cause the product to malfunction.

•  To prevent damage to your hearing, do not raise the volume 

too high. Listening to loud sound for an extended period may 
cause temporary or permanent hearing loss.

•  Discontinue use if skin irritation results from direct contact 

with the product.

•  Do not catch your fingers or other body parts between the 

housing and the arm or inside the joints.

Cautions for the product

Safety precautions

Avis du Canada, Innovation, Sciences et Développement économique 

Canada (ISED)  

L'émetteur/récepteur exempt de licence contenu dans le présent 

appareil est conforme aux CNR d'Innovation, Sciences et 

Développement économique Canada applicables aux appareils radio 

exempts de licence. L'exploitation est autorisée aux deux conditions 

suivantes :  

(1) L'appareil ne doit pas produire de brouillage; 

(2) L'appareil doit accepter tout brouillage radioélectrique subi, 

même si le brouillage est susceptible d'en compromettre le 

fonctionnement. 

Informations concernant l'exposition aux fréquences radio (RF) 

La puissance de sortie rayonnée du dispositif sans fil est inférieure aux 

limites d'exposition aux radiofréquences d'Innovation, Sciences et 

Développement économique Canada (ISED). Le dispositif sans fil doit 

être utilisé de manière à minimiser le potentiel de contact humain 

pendant le fonctionnement normal. 

Cet appareil a également été évalué et montré conforme aux limites 

d'exposition RF ISED dans des conditions d'exposition portable. (les 

antennes mesurent moins de 20 cm du corps d'une personne). 

Содержание ATH-ANC900BT





















Отзывы: