System Operation
Troubleshooting
Problem
Solution
No Sound
- Check the power supply of the transmitter and receiver
- Check that the transmitter and receiver are tuned to the same frequency
- Check that the receiver is correctly connected to the mixer or amplifier
- Check whether the transmitter is too far from the receiver or the Squelch
control is set too high
- Check for obstuctions between the transmitter and receiver
Sound Interference
- Check the location of the aerial for obstacles
- When using two or more sets simultaneously, make sure the chosen
frequencies do not interefere with each other
- Check whether the intereference is coming from other wireless
microphones, TV, radio etc. being used in the area
- When using two or more sets keep the minimum distance between the
receiver and the transmitter greather than 2m and the distance between
the two transmitters greater than 1m to avoid cross talk interference
Distortion
- Check whether the receiver volume level is set too high or too low
- Check whether the distortion is coming from other wireless microphones,
TV, radio etc. being used in the area
Содержание AT-ONE
Страница 1: ...UHF Wireless Microphone System Installation and Operation ...
Страница 16: ...WEEE Regulations ...