8
Specifications
†
Overall System
Frequency Range
DE3: 482 - 492 MHz, 495 - 512 MHz
HH2: 824 - 831 MHz, 863 - 865 MHz
Modulation Mode
FM
Number of Frequencies
2 x 4 frequencies
Operating Range
60 m, typical
Frequency Response
60 HZ - 16 kHz
Frequency Stability
+/- 0.005%, phase lock loop
frequency control
Receiver Specifications
Receiver System
Antenna switching diversity
Image Rejection
55 dB minimum
Dynamic Range
HH: 108 dB BP: 103 dB
(@ max deviation)
Sensitivity
10 dBµV (S/N 60 dB
@ 20 kHz deviation)
Total Harmonic Distortion
<1% - 20 kHz deviation @ 1 kHz
Level Control
Mic / Line (0/-20 dB)
Antenna Input
BNC type, 50 ohms - BIAS voltage
12 V DC 100 mA each
Audio Output
Unbalanced -2 dBV, Ba4 dBV
Output Connectors
Unbalanced: ¼" (6.3 mm) mono jack,
Balanced: XLRM-type
Dimensions
200 mm (7.87") W x 42 mm (1.65") H
x 122 mm (4.80") D
Weight
418 g (14.74 oz) without accessories
Accessories Included
AC Adapter, Antennas, Rack-mount
adapter, Protective carrying case
Optional System Accessory
AT8677 Dual rack mount kit
Body-Pack Transmitter
RF Output Power
10 mW
Spurious Emissions
Following federal and
national regulations
Input Connections
Pin 1: GND
Pin 2: INST
Pin 3: Mic
Pin 4: DC Bias + 10 V
Batteries (not included)
Two 1.5 V AA alkaline
Battery Life
10 hours - depending on battery
type and use pattern
Dimensions
66 mm (2.60") W x 98 mm (3.86") H
x 22 mm (0.87") D
Weight
71 g (2.5 oz) without batteries
Handheld Transmitter
RF Output Power
10 mW
Spurious Emissions
Following federal and
national regulations
Microphone Element
Cardioid condenser
Batteries (not included)
Two 1.5 V AA alkaline
Battery Life
10 hours - depending on battery
type and use pattern
Dimensions
268 mm (10.55") long,
52 mm (2.05") diameter
Weight
277 g (9.8 oz) without batteries
Accessories included
Stand clamp
† In the interest of standards development, A.T.U.S. offers full details on its test methods to
other industry professionals on request. Specifications are subject to change without notice.
