Audio Technica 6000 Series, Руководство пользователя

Страница: 8 / 56

3.2.2 Setting devices
Setting a hub or router with DHCP server
Setting ATW‒R6200 S
Setting PC (Windows)
(Note) If you want to automatically assign IP addresses in the LAN, you should enable
the DHCP server on either the ATW‒R6200 S, or a hub or router with DHCP server.
■ More than one DHCP server should not exist in a LAN. The following table describes valid
configurations for the DHCP server.
■ If you use the DHCP server on the ATW‒R6200 S or all the device settings use static IP
addresses, a hub without the DHCP server function may be used.
PC
Hub or router with
DHCP server
ATW‒R6200 S
First
installation
Second or
subsequent
installation
Pattern
1
DHCP
server
‒ Auto IP Auto IP
Pattern
2
DHCP
client
DHCP server Auto IP Auto IP
Pattern
3
DHCP
client
‒
DHCP
server
Auto IP
*1 For Auto IP on ATW‒R6200 S, see “ Obtain an IP address for ATW‒R6200 S
automatically ”.
*2 For DHCP client on PC, see “ Configuring DHCP client ”.
*3 DHCP client and Auto IP may be set as static IP addresses.