background image

To prevent fire, or shock hazard, do not expose your Reference 160S to rain or moisture.

 Do not place objects containing water on top of this unit.

This unit contains voltages which can cause serious injury or death. Do not operate with covers 

removed. Refer servicing to your authorized Audio Research dealer or other qualified personnel.

The detachable power cord on your Reference 160S is equipped with a heavy gauge, 3-conductor 

cable and a standard three-prong grounding plug in North America. For absolute protection, do 

not defeat the ground power plug. This provides power line grounding of the Reference 160S 

chassis to provide absolute protection from electrical shock.

The appliance coupler (a.c. power connector) at the rear of this unit must be accessible for 

emergency power disconnect.

For  continued  protection  against  fire  hazard,  replace  the  fuse  only  with  the  same  type  and 

rating as specified at the fuse holder.

The power button on the front of this unit, when off, does not disconnect all power from this 

unit. This unit is in sleep mode when not on.

This unit is RoHS compliant.

A note about packaging...

Save  all  packaging  in  a  dry  place  away  from  fire  hazard.  Your  Reference  160S  amplifier  is  a 

precision electronic instrument and should be properly cartoned any time shipment is made. 

You may not have occasion to return your unit to the factory for service, but if that should prove 

necessary, or other occasion requiring shipment occurs, the original packaging will protect your 

Reference 160S from unnecessary damage or delay.

The AC Power Supply Cord must be disconnected from the amplifier before replacement or 

installation of vacuum tubes.

Handling and moving the Reference 160S

The Reference 160S weighs 100 lbs. (45 kg). Two people are required to safely lift the amplifier.  

The chassis has both front and rear pairs of handles for this purpose. Note the rear of the 

amplifier with the power and output transformers is the heavy end. 

5

Warnings

REF 160M Manual.indd   5

4/4/18   8:54 AM

 Important!

Содержание REFERENCE 160S

























Отзывы: