Installations Hints
4
In case of installation in cabinet or rack, ensure the ventilation requirements. The depth of the unit is 395 mm.
The dimensions in height is 3 units Rack (132 mm).
Do not position high-gain audio equipment like preamplifiers or recorders just above or below the amplifier.
Despite the protections of the radiation device, magnetic fields can induce hum in unscreened ancillary
equipment.
Do not obstruct the entrance and exits of air for the cooling of the amplifier. Any impediment to the free
movement of air in the amplifier may cause a failure not covered by the warranty.
The amplifier use in an environment where the air is confined or polluted requires frequent internal cleaning.
Smoke and dust particles accumulated inside the appliance may cause failures not covered by the warranty.
This cleaning should be done by qualified personnel.
Before any work on the wiring, be sure to turn the control knobs fully counterclockwise and turn off the
amplifier.
Only use good quality speaker cables, unshielded.
Use good quality audio cables, shielded, for inputs. A balanced connection is recommended to keep a signal
without degradation.
Example
5
7
PRIORITY
Switch
Horn
Speaker
Column
Message Player
Amplifier
Speaker
Recorder
Microphone
Table Microphone
CD / MP Player
Tuner
Recorder
