Audio Pole FORCE 700, Руководство пользователя

Страница: 6 / 11

Controls and Settings
6
3
9 – BAL INPUTS
XLR balanced inputs 1 and 2
10 – UNBAL INPUTS
RCA unbalanced inputs 1 and 2
11 – MODE
Mode selector: PARALLEL – SREREO – BRIDGE, (see chapter 4).
Any action on this switch must be carried out with the amplifier off.
12 – OUT
Speaker outputs on screw terminals.
Check the cables tightness before use.
13 – OUT
SPEAKON outputs.
Do not use the binding posts and SPEAKON outputs simultaneously.
14 – Cooling fan
Do not obstruct the air input and exit of the amplifier cooling. Any impediment to the free movement of air in
the amplifier may cause a failure not covered by the warranty.
15 – AC INPUT
Plug in the mains cable. Before any connections make sure that the power cable is not damaged. The
connection to the mains supply must have an earth connection. The mains voltage supplied must conform with
the electrical characteristics of the appliance (see chapter 8).
Back Panel