18
english
AUDIO PHYSIC VIRGO III
Positioning Your VIRGO III Loudspeakers
1.
Once the loudspeakers are positioned parallel to the
side walls, turn them inwards until an imaginary line
is pointing from the tweeter of each loudspeaker
towards your preferred listening position. If you prefer
to listen to music alone, the two imaginary lines
coming from the loudspeakers should ‘intersect‘ at
your listening position. This will result in excellent
localisation and spatial image. If you would rather
listen to music in a group, turn the loudspeakers
further inwards so that the imaginary lines cross in
front of the listening position.
2.
If you prefer a wider soundstage and more generous
spatial imaging, position the loudspeakers at less
of an angle so that the imaginary lines cross just
behind the listening position. Once a specific
angle has been reached, the spatial image in the
centre between the loudspeakers will begin to lose
structure and precision. You can easily identify the
ideal angle by using a mono recording. When the
voice of the artist sounds clear again and comes directly
from the middle between the loudspeakers, you have
found the ideal position.
Second step:
Experiment with the angle.
When it comes to positioning
your loudspeakers, your
listening taste plays an
important role. To find the ideal
position, mono recordings are
extremely useful, particularly
those with a singing voice and
few instruments.
First step:
Angle the loudspeakers so that
an imaginary line is in place
between the tweeters and your
listening position.
