VCP-015-02-x Installation & Operation Manual
Document # 540228, Rev A, 05/2003
Page 11 of 18
6.4 Pinout Assignment and Descriptions
Pin Configuration
Pin #
Description
1
+28 VDC, Power Input
2 Ground
3
R+ Audio Output
4
R- Audio Output
5
L+ Audio Output
6
L- Audio Output
7
Data Bus (A)
8
Data Bus (B)
9
Infrared Input +
10
Infrared Input -
11 IR
Strap
2
12 IR
Strap
3
13 IR
Strap
4
14
IR Strap Common
15 Reserved
7.0 Post-Installation Test
7.1
28 VDC power has been connected to the unit. The audio signal
output of the unit is generally connected to cabin speaker systems in
addition to headphone locations. Verify all connections before supplying
power to the unit. Verify video inputs are available to the system.
7.2
Load the VCP-015-02-x with a videocassette tape. Use the front panel
controls or the hand-held remote control unit to select PLAY. Check for a
picture on the appropriate monitor. Verify the audio can be heard through
the speaker and/or the headphone system.
7.3
Test each function of the VCP unit (Fast Forward, Rewind, Eject, etc.).
See Section III for front panel functions. Ensure each button works
properly and that the unit Ejects smoothly.
