DVD-401-01-x Installation & Operation Manual
Document # 540254, Rev IR, 10/2002
Page 12 of 18
6.8
Pinout Assignment and Descriptions
J1 (DVD 1)
J2 (DVD2)
Pin #
Description
Pin #
Description
1
+ 28 VDC
1
+ 28 VDC
2 Ground
2 Ground
3
R+ Audio Output
3
R+ Audio Output
4
R- Audio Output
4
R- Audio Output
5
L+ Audio Output
5
L+ Audio Output
6
L- Audio Output
6
L- Audio Output
7
Data Bus (A)
7
Data Bus (A)
8
Data Bus (B)
8
Data Bus (B)
9
Infrared Input +
9
Infrared Input +
10
Infrared Input -
10
Infrared Input -
11
IR Strap 2
11
IR Strap 2
12
IR Strap 3
12
IR Strap 3
13
IR Strap 4
13
IR Strap 4
14
IR Strap Common
14
IR Strap Common
15
“Pause Mode” Constant GND Input
15
“Pause Mode” Constant GND Input
7.0 Post-Installation Test
7.1
28 VDC power has been connected to the unit. The audio signal
output of the unit is generally connected to cabin speaker systems in
addition to headphone locations. Verify all connections before supplying
power to the unit.
7.2 Load
DVD1 with a disc. If the disc does not start playing automatically,
then use the DVD-401-01-x front panel controls or the handheld remote
control unit to select PLAY. Verify a picture can be viewed on the
appropriate monitor and that the audio can be heard through the
speaker/headphone system.
7.3
Repeat above step to verify DVD2.
NOTE: DVD1 is the top drive.
