AUDIO INTERNATIONAL, INC. ______ 12/97
31
Document #560017, Rev. IR, Model No.: DVD-010 (-011, -012, -013)
1.
To select a favorite section and begin programming, open the DVD and insert a disc.
While the unit is stopped, press the MEMORY button. A memory menu will appear on
the monitor with a blank list. There are blanks for title and chapter numbers that will be
filled as selections are programmed.
2. Press
the
“T” button on the numerical keypad to highlight the area beside the title on the
monitor. Use the numerical keypad to enter the title number to be selected.
3. Press
the
“T” button again to highlight the area beside Chapter on the monitor. Use the
numerical keypad to enter the chapter number to be selected. Press the CLEAR button if
a number in incorrectly entered and enter the correct number. Press ENTER to complete
the selection.
4.
As selections are entered, they will appear on the memory menu. Continue to press the
“T” button while moving to each title and chapter fill-in block. Follow the same
procedure to select each desired location. (example: to select title 1, chapter 10, press
“T”, 1, “T”, 1, 0, ENTER) Press the MEMORY or the RETURN button and the Memory
menu will disappear.
