Audio Design Musway CSVT8.2C, Руководство по установке

Страница: 13 / 16

13
ENGLISH
RR+
RL+
FL+
FR+
RL-
FL-
FR-
RR-
INSTALLATION (Example T5)
Then remove the car radio from the radio slot. Unplug the vehicle‘s Quadlock connector from
the car radio.
Now connect the speaker cables of the tweeter
units with the cables on the back of the Quad-
lock connector. Please note the assignment of
the Quadlock connector on the left.
Use commercially available cable splice con-
nectors to tap the loudspeaker signal (FR +/-
and FL +/-).
NOTE: If no tweeters were installed in your vehicle ex-factory, you will have to lay speaker cables to
the radio slot for each side of the vehicle. You then have to connect these to the connections of the
new tweeter unit. If you do not have an adapter for this, you can also cut off the vehicle-specific con-
nector and connect the cables with a quick connector.