Audio Design ESX Quantum QL810SP, Руководство пользователя

Страница: 20 / 32

20
ENGLISH
MECHANICAL INSTALLATION
Before you start with the installation, disconnect necessarily the GROUND connection wire from
the battery to avoid any risk of electric shocks and short circuits.
CAUTION
Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gas
tank or the like.
Ensure that the chosen location provides a sufficient air circulation for the device. Do not mount the device into
small or sealed spaces without air circulation near by heat dispersing parts or electrical parts of the vehicle.
Do not mount the device on top of a subwoofer box or any other vibrating parts, whereby parts could loosen
inside.
The wires and cables of power supply and the audio signal must be as short as possible to avoid any losses
and interferences.
At first you need to find a suitable installation loca-
tion for the device. Ensure that enough space for the
installation of the cables remains and that they will not
be bent and have sufficient pull relief.
Lay the device aside and then drill the holes for the
mounting screws at the marked locations.
Please ensure not to damage any components of the
vehicle while you drilling the holes. Alternatively (de-
pends on the material of the surface) you can also
use self-tapping screws.
Keep the device at the chosen mounting location in
the vehicle. Then mark the four drill holes with an ap-
propriate pen or marking tool through the designated
mounting holes at the device.
Then uphold the device to the chosen position and fix
the screws through the mounting holes into the drilled
screw holes.
Ensure that the mounted device is tightly fixed and
can not come loose while driving.
4x
4x
4x
4x
Mounting hole
Drill
Mounting hole
Pen or
marking
tool
Fixing screw
Marking
1 2
4
3