Audio Authority ADX-0808 Скачать руководство пользователя страница 2

Страница: 2 / 12

Configuration Using the Setup Utility

The Setup Utility is the most efficient way to set up ADX advanced features (using *Mac or PC), and provides an easy

way to save a copy of each configuration to edit off-site, or for backup. The following settings can only be configured using

Ethernet/serial commands or the Setup Utility: DSP (EQ), Network Settings, and Groups. Some of the ADX features are not

compatible with third party controllers that are designed to perform similar functions.

Setup Tips:

Select Programming Mode:

Select the mode you will be using for your ADX configuration. There are three options:

• File Mode - (default) requires a USB drive to save and transfer the setup file to the ADX via the back panel USB jack.

• Serial Mode - requires a direct serial port connection.

• Ethernet Mode - requires a connection via a network or a direct Ethernet connection.

Create A New ADX Configuration:

If you are setting up a new ADX, start with the blank configuration file.

Modify An Existing Configuration:

If you are modifying an existing setup, import the current setup file.

*All examples show setup using a Mac for configuration.

Network Tab and Connection Menu

Network Settings.

Detect command.

Network Tab.

Содержание ADX-0808












