15
14
Your hearing aids feature a multifunctional
rocker switch for controlling the volume and
selecting the different programs. The rocker
switch can be activated by pressing the
top (+) and bottom end (-).
3.6 Volume control and program selection
3.6.1 Multifunctional rocker switch
The rocker switch can be programmed with one of three
functions. Your hearing care professional has marked here
which of the functions has been set for your hearing aids:
Volume control
To control the volume, press the multi-function rocker
switch briefly on the top or bottom (also see 3.6.2).
Program selector switch
To change the program, press the multi-function rocker
switch briefly on the top or bottom (also see 3.6.3).
Volume control and program selector switch
combined
To control the volume, press the multi-function rocker
switch briefly on the top or bottom; to change the program
hold the switch down for approx. 1 second (see also 3.6.2
and 3.6.3).
The optional Concha-Clip helps improve the fit
of the receiver unit in the ear.
To position the Concha-Clip, bend slightly and
place the Concha-Clip carefully in the outer
part of your ear.
Switch the hearing aid on by closing the
battery compartment securely.
Caution: Risk of injury!
Always wear the receiver module with its
dome or PowerSleeve and check that they
are positioned securely on the tube.
Warning: Risk of injury!
In some very rare cases the dome may remain in the ear
canal on removal. Should this happen, please contact your
doctor or hearing care professional at once. Please do not
try to remove the dome yourself
Lift your hearing aid and slide it carefully over the outer part
of your ear. Carefully pull the tube with the earpiece out of the
ear canal. Switch the hearing aid off by moving the battery
compartment to the OFF position.
3.5.2 Removing the hearing aids