RZ062 Equalizer
‣
8
áUDIFIED
Input and output control
‣
Turn to set the input and output gain
‣
The range is ±18 dB
LINK switch
‣
If the LINK switch is in the OFF position, the left (mid) and right (side) section of the EQ work
independently.
‣
If the LINK switch is in the ON position, the left (mid) and right (side) sections are linked, so
the controls on the left and on the right are automatically set to the same value.
LR-MS switch
‣
If the switch is in the LR position, the left part of the RZ062 controls the left channel and the
right part controls the right channel.
‣
If the switch is in the MS position, the left part of the RZ062 controls the mid signal and the
right part controls the side signal.
‣
It makes no sense to use the MS mode if the controls are linked.
If you are not familiar with MS recording, refer to recording practices in books or online to
learn how to utilize the MS mode.
Saturation indicators
‣
The signal level after input meters is affected by the EQ settings, so the device may saturate at
levels different from 0 dB on the input meters.
‣
That’s why we added indicators of the saturation. They smoothly reflect the complex
saturation amount on both valves in the EQ circuit.
