15
Audio routing
DLC has eight line inputs and outputs, labelled the
DLC VCA Inputs/Outputs. These are accessible
on the rear of the console on DB25 connectors
(location depends on console configuration).
METERS
Displays the level of the signal coming from the
source, unless the DAW Meters switch on the
control surface is engaged.
METERS POST VCA
Switches the meters between Pre and Post fader.
SOURCE
The audio can be sourced from the DLC VCA
Inputs or the eight Sub Groups on the console. If
S GRP is selected, it breaks the signal to that Sub
Group, unless it is also selected as the destination
on that channel.
DEST
The eight DLC channels can be assigned to the
DLC VCA Outputs or the Sub Groups. If S GRP is
engaged, it will replace all other channels routed
to the Sub Group, unless the Source button is also
set to S GRP.
PAN
Pans the audio in the mix.
MIX
Assign the output of the DLC channel to the Mix
Bus. You can therefore route the line level sources
directly to mix, effectively adding a further eight
channels to the console.
SELECT
Selects the channel, for use with Unity and Auto
Safe Mode, as well as in the DAW Layer.
CUT
Cuts the channel, can be automated in the
Analogue Layer, and used in the DAW Layer.
SOLO
Solos the channel in Analogue and DAW Layers.
This cannot be automated.
1
3
4
5
6
2
To insert the DLC channel
into a Sub Group and
automate it’s volume,
ensure that both the Source
and Destination buttons are
switched to S GRP.
7
8
9
1
2
3
4
5
6
7
8
9
