Warnings
Please check the package whether any damage is caused by
transportation after you got the lights. If there is any damage, please do
not use this fixture, and contact the dealer or manufacturer as soon as
possible.
1. This product is only suitable for professional use, and does not apply
to security for other purposes.
2. Be cautious to prevent the impact that is caused by the device. The
use of this product should pay attention to: fire, heat, electric shock,
ultraviolet radiation, the lamp to explode or Shedding caused serious or
fatal injury.
3. Need to read the instructions before use energized or installing.
Follow through the operation of security methods and pay attention to
the warning signs on the specification and equipment.
4. This product is only suitable for indoor use, protection class IP20.
5. Lamps should be kept dry to avoid Moisture, overheating or dusty
environment. Shall stop working once the using environment exceed
40
℃.
6. Prevent lamps come into contact with water or any other liquid.
7. Please replace the protection screen, optical lens, UV screen if any
visible damage, i.e. function no use, crack or gash caused.
8. Make sure the facilities and hooks can withstand at least 10 times the
weight of the fixtures when hanging the devices.
9. Please make sure the hardware strong enough and do not have any
damage, or use safety rope to increase the safety of the fixtures.
10. Please reduce the height of the hanger rod to a safe position when
installing or dismantling the fixtures.
11. Avoid eye exposure to the lighted LED lamp. Do not use the fixture
without lens or protection cover.
12. Please replace the relevant component if any damage caused.
13. Please make sure the voltage used comply with the voltage for the
fixture, moreover to have overload and leakage protection. Every fixture
shall earth correctly accordingly to the relevant and professional
standard when installing the fixtures.
Page 1
Page 10
Declare
The product is with good performance and complete package when it is
delivered. The end-user of this product should follow all the above
instructions and warnings. Any damage caused by misuse, malfunction
and problem caused by ignoring the instructions are not included in
the repair guarantees of the manufacturer or dealers.
Maintenance and Clean
Maintenance
1. Please replace in time if the skintle of inner power wires is getting
yellow
2.Please do maintenance every 2 months and check all
screws,connection terminals without any looseness. The lack of
maintenance might cause the light problem.
Clean
Two sides of lens and reflector must be cleaned frequently which will
make the effect of light is better. Clean times depend on the using
environment. Wet, smoky and dirty environment will make the lens
accumulating dirt.
1. Using soft linen or specified glass clean lotion
2. Dry the parts carefully
3. Please wipe exterior of lens one time every at least 20 days and the
inner 30days
