Audial USB board Mk2, Инструкция по эксплуатации

Страница: 6 / 16

6 Audial USB board Mk2
MAXIMUM SAMPLING RATES
At its input, this device is generally 192 kHz
compatible, however maximum output sampling
frequency might be limited by the reclocker, and its
requirements regarding the master clocks frequencies.
Table below shows detailed specifications.
Please note that the TDA1541, both -A and non -A
versions, can normally work up to 192 kHz in
simultaneous data mode, however in I2S it is limited to
96 kHz in any case.
UP TO 384 KHZ COMPATIBILITY
Firmware version 3.5 has been released in September
2017, to add 352.8 kHz and 384 kHz compatibility to
the boards with TDA1541(A) simultaneous data
output and 22.5792 / 24.576 MHz master clocks.
Please note that the Windows audio is currently limited
to 192 kHz, however the operation at 352.8 kHz and
384 kHz is possible by means of ASIO or WASAPI
(exclusive mode) interface.
Also, while non -A version of TDA1541 chip will
normally work up to 384 kHz, a TDA1541A will need a
small tweak. Please contact us for detailed
information.
Master clock frequencies Firmware
Maximum sampling rate
Simultaneous data I2S S/PDIF PCM1704
11.2896 / 12.288 MHz 3v3 192 kHz 96 kHz 96 kHz 192 kHz
22.5792 / 24.576 MHz 3v3 192 kHz 192 kHz 192 kHz 192 kHz
22.5792 / 24.576 MHz 3v5 384 kHz N/A N/A N/A