Audial USB board Mk2, Инструкция по эксплуатации

Страница: 4 / 16

4 Audial USB board Mk2
USB AUDIO CLASS 2.0
This USB device employs USB Audio Class 2.0
definitions.
Mac OS X and Linux are natively USB Audio Class 2.0
compliant for several years now, and this device hence
does not require special driver when used with Mac OS
X or Linux.
WINDOWS USB AUDIO CLASS 2.0
Since September 2017, Windows 10 also supports
USB Audio Class 2.0 definitions. This basically makes
this device plug and play with Windows 10, and once it
is connected to Win 10 machine, the small window will
pop up in the bottom right corner of the screen,
reporting about the initial connection routine. Once
this process is finished, the device can be found as
playback audio device, available in the system.
DEDICATED WINDOWS DRIVER
Audial provides dedicated Windows driver for this
device, which is still necessary with earlier Windows
versions. Also, this driver provides additional
functionality as firmware update, ASIO interface,
buffer length control, and can be generally preferred
soundwise.
Users can download this driver from Audial web site.
Driver version 1.26
can be install ed t o Windows XP,
Vista, 7, 8, 8.1 and 10. Later driver version 2.10
however improves on compatibility with later PC
systems, and can be installed to Windows 7, 8, 8.1 and
10. All driver versions are compatible with both 32 and
64-bit Windows.
To install the driver, please unzip provided file, and run
setup.exe. Installation window will pop up, and at one
stage you will be asked to connect the device. Also,
during this process, depending on your Windows
version and security settings, you might be asked a
couple of times to allow the installation, so please do
so. These windows will look like this.
Once the installation is complete, you can configure
your settings by using the control panel, available in
Windows Start Menu -> Audial.