Audi TT Roadster, Обучение по обслуживанию

Страница: 19 / 52

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
19
Note
For further information on emergency
operation and operation of the convertible
top, please refer to the vehicle's Owner's
Manual.
391_078
391_079
391_080
At the centre of the convertible top at the front
there is a blanking cap which can be removed using
a screwdriver.
The convertible top is opened in the reverse
order of closing.
A complete automatic convertible top operating
cycle (opening and closing) must be performed as
a function test after all emergency operation and
troubleshooting procedures.
The tools required for emergency operation are
included in the car tool kit.
In the spline shaft beneath, screw in the crank,
threaded end first, until fully home.
The spline shaft acts as the driving shaft between
the convertible top lock motor V223 and the linkage
of the convertible top locks.
Pull out the spline shaft downwards using the
crank.
In place of the spline shaft, insert the crank, spline
head first, as far as it will go. To open the
convertible top lock, turn the crank clockwise.
Now press the convertible top down onto the
windscreen frame by hand. To close and fully lock
the convertible top lock, turn the crank
anticlockwise.
Now insert the spline shaft until fully home and
unscrew the crank by turning it anticlockwise.
Spline head
Spline shaft