Audi RNS-E, Руководство по эксплуатации

Страница: 135 / 194

Navigation (NAV) 130
– Select Start route guidance
Þ
page 129, fig.135, the
route is calculated and the map display is shown auto-
matically.
– Select one of the routes suggested in the single destina-
tion mode
Þ
page 130 on the map display by rotating
and pressing the control knob.
– In the route plan map display, confirm the route
suggested
Þ
page 132 by rotating and pressing the
control knob.
After calculating route guidance, the Navigation System switches
automatically to map display mode. The route guidance is shown in
simplified form in the instrument cluster display
Þ
page 113. You
are additionally receive navigation voice prompts
Þ
page 112.
When you have entered a final destination
Þ
page 119 and started
route guidance, you are offered up to three different routes to reach
your destination
Þ
page 119.
When you have entered a route plan and started route guidance,
you are shown the route with the different stopovers and various
information in the overview
Þ
page 132.
Entered destinations can be saved
Þ
page 135 and
Þ
page 137.
Route criteria
Þ
page 141 can be changed at anytime during guid-
ance, and the route will be recalculated.
If you do not complete route guidance you started, this route guid-
ance will be continued the next time the vehicle is started. This also
applies to destinations entered which cannot be reached because of
local conditions (e.g. lake or tourist attraction). If you would like to
terminate this route guidance, select Cancel route guidance
Þ
page 132
Tips
Calculated destinations can also be changed in the map display by
moving the crosshairs
Þ
page 149
Single destination information before route
guidance
Fig. 136 Navigation: Example of map display after route has been calculated
When you have entered the destination data
Þ
page 117
and the road network allows, you are offered up to three
different routes to choose from.
– Select one of the optional routes by rotating the control
knob.