7. Importing and exporting customer data (MMI Navigation Plus)
Important information about importing and exporting customer data
Requirements:
To save customer data, you will need a storage medium (SD card or USB stick)
on which the customer data can be stored.
1. It is only possible to import/export customer data using MMI Navigation Plus
systems.
2. The export/import customer data feature can be used to transfer customer-specific
data onto a new system when the information electronics control unit has been
replaced. The following data is taken into consideration when importing/exporting:
a. Address book entries
b. Sound settings
c. Navigation settings
3. The export file containing customer data is protected by a code. This code can be
set by the customer through the MMI (Car/Setup -> Data encryption). The default
code is "MMI3G+". When the customer data has been imported, a prompt will appear
when the system is started up (Note: The prompt only appears when the ignition
is switched on). The customer can enter the code via this prompt. The imported data will
only be visible in the MMI when this code has been entered.
Please advise the customer about the code before data export is carried out, as this
is the only way personal data can be protected from unauthorised access.
