Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Air cleaner housing: cleaning
4-cyl. petrol engine 2.0 ltr. TFSI hybrid
6-cyl. petrol engine 2.5 ltr. FSI
6-cyl. petrol engine 3.0 ltr. TFSI
8-cyl. petrol engine 4.0 ltr. TFSI (version 1)
8-cyl. petrol engine 4.0 ltr. TFSI (version 2)
8-cyl. petrol engine 4.2 ltr. FSI
12-cyl. petrol engine 6.3 ltr. FSI
6-cyl. diesel engine 3.0 ltr. TDI
8-cyl. diesel engine 4.2 ltr. TDI
3.50.1
4-cyl. petrol engine 2.0 ltr. TFSI hybrid
Special tools and workshop equipment required
♦ Torque screwdriver - VAS 6494- , measuring range 1.5 to 3
Nm
♦ Or: torque screwdriver - V.A.G 1624- , measuring range 1 to
5 Nm
♦ Torque wrench - V.A.G 1331- , measuring range 6 to 50 Nm
♦ Or: torque wrench - VAS 6583- , measuring range 3 to 60 Nm
♦ Or: torque wrench - VAS 5820- , measuring range 20 to 100
Nm
Table of tightening torques for installation:
Component/fastener:
[Nm]
Securing bolts for air cleaner (top section) 1.5
Securing bolts for longitudinal member
(top right)
24
Removal steps:
– Remove lock carrier cover ⇒ General body repairs, exterior;
Rep. gr. 50 ; Lock carrier; Removing and installing lock carri‐
er .
– Remove bolts -1- and -3- and detach longitudinal member (top
right) -2-.
Step 1 - removing air filter element:
Audi A8 2010 ➤
Maintenance - Edition 11.2014
104
3. Maintenance