16
Troubleshooting
This section lists some problems that you might encounter while using the
headset.
1.
No sound contact between the headset and another device:
The headset and the receiving device have to be paired to recognize
each other.
They also have to be within range of each other. Make sure the headset
and the receiving device are no more than 10m./30ft. apart with no solid
objects in between.
2. The headset indicator light flashes red
.
This indicates that the headset has only limited speech and standby time
left. Plug the headset to a USB port and charge it for approximately 1.5
to 2 h ours.
3. No indication of charge is shown.
If your headset battery is empty, or has not been used for a long time,
it may take several minutes for the light to indicate charging (a steady
red light appears).
17
Troubleshooting
4. Pairing is unsuccessful
If pairing has not succeeded after a few tries, you may have to reset
the headset first before pairing.
To reset the headset:
With the headset turned off, press and hold the multi-function button for
about 8 seconds until the indicator light flashes red and green, and
then press and hold the multi-function button until the indicator light goes
off. The headset is now reset.
5. Some headset functions do not work
If you notice that you cannot make use of all the features in the
headset , please check if your mobile phone has the right software
version.
Electromagnetic Interference/Compatibility:
Note:
Nearly every electronic device is susceptible to
electromagnetic interference (EMI) if inadequately shielded,
designed, or otherwise configured for electromagnetic
compatibility.
To avoid electromagnetic interference and/or compatibility
conflicts, turn off your device in any facility where posted
notices instruct you to do so. Hospitals or health care
facilities may be using equipment that is sensitive to
external RF energy.
15
Safety & Precautions
(
Note:
Please read all this information before using the ADB-2383)
1. Check for any exceptions or rules, due to national/local
®
requirements or limitations, in usage of this Bluetooth
®
headset or any other Bluetooth devices.
2. Check also the laws and regulations on the use of mobile
phones and hands free equipment in the areas where you drive.
3. Please note that only authorized Audex dealers or service partners
should remove and/or replace any internal components of this device.
4. Please use Audex original accessories only. Use of non-Audex original
accessories may result in damage, loss of performance to the
headset, injury, electric shock or even fire.
5. Please do not expose the headset to extreme high or low
temperatures, moisture or fluid.
6. Please do not drop, throw or bend the headset as rough
treatment will damage it.
7. If the headset will not be used for a while, please store it in
a place where it is dry, free from dust, and not prone to extreme
temperature fluctuations.
Important information
18
