14
Freq. Range:
The FM reception frequency range can be switched between 87.5 ~ 108 MHz and 64 ~ 108
MHz, depending in which part of the world the system will be used. Toggling between both
frequency ranges can be done by single pressing the function dial.
Mono:
The FM reception is standard set to stereo mode, however it will switch automatically to mono
mode if the signal reception strength is insufficient. This reduces the noise and improves the
sound quality when having poor signal reception.
Manual switching the output to mono mode is possible using this function, allowing the output
to be fed to mono systems, such as 100V public address amplifiers. Toggling between mono
and stereo mode can be done by single pressing the function dial.
Back:
Returning to the main screen is done by selecting ‘Back’.
General settings
The general settings menu for TSP40 is loaded when
pressing the (general settings) button. The general
settings menu allows to configure all the global
settings for the TSP40 unit, keeping aside the audio
and frequency settings.
Lock:
When selecting ‘Lock’, the system will be locked and
will require a password to be entered before any further
action can be taken (if the password is enabled).
Info:
Info will give an overview of the software versions the TSP40 is running.
LCD Settings:
Adjustments for the LCD settings can be made here. The brightness can be adjusted within a
range of 10% to 100% (standard is 80%). Adjusting of the LCD brightness can be convenient
when the device is placed in an environment with very low or very high ambient light. Hereby
the clarity of the LCD can be adjusted being clear but unobtrusive.
The backlight off time can be adjusted within an interval of 10 up to 120 minutes or never
(always on), making the backlight of the LCD automatically turn off after the set time.
Password:
Password protection can be enabled, avoiding unauthorized users to make any adjustment
to the system. The password is a four-digit code. In default, the password is set to ‘0000’
which gives full access to the system without requiring any password to be entered. If the
configured password is different from ‘0000’, the user will be requested to enter the password
before any access to the systems functions is provided.
Lock
Info
LCD Settings
Password
Back
GENERAL SETTINGS
Lock device with password
