AUDAC PRE220, Руководство пользователя

Страница: 11 / 16

11
When pairing with your device for the first time, the ‘PAIR’ button should be pressed and the
LED will start blinking for about 2 minutes. During this period, the device can be discovered
and is indicated as Bluetooth ID ‘AUDAC PRE series xxxx’ (where the xxxx stands for an
unique ID for each single device). When both devices have been paired before, the transmitter
will be recognized by the receiver and will allow continuous pairing without pressing the
‘PAIR’ button.
3.5 mm Jack input (CH2):
A 3.5 mm jack input connection is provided on the front panel of the unit on top of the channel
2 mixing control. This input is an unbalanced stereo line input, mixed with the rear panel
input of channel 2. Any portable device (such as laptop, smartphone or tablet) with 3.5 mm
jack audio output can be connected to this easy accessible input.
NOTE
The gain control potentiometers for channel 1 (mixed with Bluetooth receiver) and channel 2
(mixed with front 3.5 mm jack input) are also affecting the level for these secondary inputs.
Output master control:
Each output section contains a master volume control, two band tone control and 6-segment
VU LED bar. The master volume control allows regulation of the overall output level, while
two-band tone control allows bass / treble adjustment within a range of ± 15 dB and the
VU LED bar indicates the overall output level.
Power switch:
Allows to power the system ON and OFF. The blue indicator LED illuminates when switched on.
Rear panel overview