AUDAC NOBA8, Руководство пользователя

Страница: 11 / 12

11
Step 3: Mounting the wall plate
Mount the wall plate to the installation location of the NOBA8. The wall plate has to be fixed
using four screws. The exact screw positioning is shown in the drawing below. The used
fasteners should be chosen depending on the mounting surface (brick, concrete, wood,
gypsum, ... ). Make sure the mounting surface can structurally support the weight of the
speaker.
340
365
34
,5
Step 4: Connect the wiring
Once the wall plate is mounted, the wiring shall be connected before hooking the cabinet to
the wall plate. For more information how the connections should be made, check chapter 2
and chapter 3 of this instruction manual. When connecting, make sure all wiring is guided and
fixed properly so the loose wiring won’t touch any moving parts such as the speaker cone.
Step 5: Hook the cabinet to the wall plate:
The last step is hooking the cabinet to the wall plate. This is done by sliding the cabinet
support bar over the wall plate followed by a downwards movement of the loudpeaker, as
indicated in the drawing below.