AUDAC ARU20 Series, Руководство пользователя

Страница: 21 / 28

21
The DCHP function is standard switched off and can be turned one by clicking and
enabling the corresponding indicator.
The factory default network settings are as follows:
DEFAULT NETWORK SETTINGS
DHCP: OFF
IP Address: 192.168.0.197
Subnet mask: 255.255.255.0
Gateway: 192.168.0.253
DNS1: 8.8.4.4
DNS2: 8.8.8.8
DHCP:
When DHCP is enabled, the IP address for the ARU20x will be automatically assigned by the
DHCP server in your network. It is not always recommended to use this option, since then
the IP address of the system will not always be known for the user and might be different
after system reboot.
IP address:
The IP address for the system can be configured in this window. Adjustment of these settings
is just done by manual changing the values of the text fields.
Network settings:
All other network settings such as subnet mask, Gateway, DNS 1 and DNS 2 can be
configured in this window. The default settings are configured in such way to suit most
typical installations requirements.
In case of special network restrictions or requirements, consult your network administrator
for more details on the network settings.
Delayed startup:
The delayed startup function allows to activate all relays with a specific pre-configured
delay time in between activation. This allows you to use the ARU20x as a power-on delay
unit, in case heavy loads are connected in your installation with high in-rush currents.