AUDAC APM 01, Руководство пользователя и инструкция по установке

Страница: 20 / 36

19 19 19 19
Jumper settings for audio routing
In this example 3 jumpers are set.
The jumper on the right side above input “IN_1” connects the left channel of “IN_1.A” to the right
channel of “IN_1.A” (blue tracks). The second jumper can be used to connect the left channel of input
channel IN_1.B to the right channel of IN_1.B. Input channel A and B each have their own jumper.
The two jumpers on the right side connect “IN_7.A.right” with “IN_8.A.right” (top jumper, green tracks)
and “IN_7.A.left” with ”IN_8.A.left” (second jumper, purple tracks). The third jumper can be used to
connect “IN_7.B.right to ”IN_8.B.right”, and the fourth jumper can be used to connect “IN_7.B.left” with
“IN_8.B.left”. As you can see, it’s possible to connect an input channel A or B to a previous and/or next
input channel A or B.
Lots of combinations are possible. In the example above, the A input channels are used, but it’s also
possible to use the B input channels.